L.Pipe — Thin-Wall Ductile Iron Pipe

Product description
A lightweight, thin-wall ductile iron pipe developed as an alternative to polymer pipes in potable-water distribution networks.

Key features

• Approximately 40–50% lighter than conventional ductile iron pipe
• Easier transportation and handling
• Lower installation force
• Suitable for potable-water distribution
• Six-metre standard pipe length
• C25 pressure classification shown in the catalogue
• Maximum angular deflection: 6°
• Cement mortar internal lining
• Metallic zinc external protection
• Epoxy or polyurethane finishing coat
• Tyton-type installation method
• Suitable for bundle delivery

Sizes shown in the catalogue

• OD 90
• OD 110
• OD 125
• OD 160
• OD 200

Pipe length

• 6 metres

Weights stated in the catalogue

• OD 90: 47 kg
• OD 110: 58 kg
• OD 125: 67 kg
• OD 160: 90 kg
• OD 200: 121 kg

Coating and lining

• Metallic zinc external coating: 200 g/m²
• Green epoxy or polyurethane finishing layer: 70 microns
• External coating according to ISO 8179
• Portland cement internal lining according to ISO 4179 and EN 598
• Nominal cement lining thickness shown: 3 mm

Dimensional standard

• ISO 16631

Installation notes

• Installation is similar to Tyton-joint pipe installation
• A guide tool is recommended
• Only the required amount of approved lubricant should be used
• The socket and spigot should be cleaned before assembly
• Pipes should be unloaded and stored on straight, squared timber supports